Multiple Mechanism of NCA Polymerization: Effect of N-Acetylglycine NCA and Related Additives

Polymerization of α-aminoisobutyric acid NCA by alkaline salts of various basicity as well as amines has been investigated. The study was focused on the effect on the initial polymerization rate of additives such as N-acetylglycine NCA and some other less electrophilic additives (l-acetyl-2-pyrrolidone, 3-acetyl-2-oxazolidone, 1-acetyl-3-methylhydantoin) which are all models of the growing chain end produced by the NCA anion pathway. The acetyl endgroup was detected by 250 MHz ¹H-NMR in all the polymers of α-aminoisobutyric acid NCA obtained in the presence of l-acetyl-3-methylhydantoin and triethyl amine or sodium methoxide initiators, whereas the additives influenced variously the kinetics of polymerization according to the nature of the initiator used. The results were interpreted in the light of a multiple mechanism supposing the simultaneous presence of the initiator anion, its conjugate acid, and NCA anion for basic salt initiation. Thus, the observed effect has to be considered as the sum of an elementary acceleration due to NCA anion and of an elementary deceleration due to the initiator anion. Predominance of the pathways involving NCA anion could be shown this way. This conclusion could be extended to γ-benxyl-L-glutamate NCA which is a more reactive NCA. However, the deceleration observed with some additives led us to believe that a nonnegligible participation of initiator anion during initiation cannot be excluded.     

Synthesis and Properties of Self‐doped Polyaniline with Polycationic Templates via Biocatalysis

The enzyme horseradish peroxidase (HRP) was used to polymerize acid‐functionalized anilines to make self‐doped polymer in the presence of a polycationic template. Anionic templates such as sulfonated polystyrene (SPS) could not function as a suitable template for the polymerization of acid‐functionalized aniline derivatives. Several types of polyelectrolytes were used as templates to observe the structural effects and doping behavior of polyaniline/template complexes. The synthesis is straightforward and the conditions are mild in that the polymerization of conducting polyanilines may be carried out in buffered solutions as high as pH 6, with a stoichiometric amount of hydrogen peroxide and catalytic amount of enzyme. The conductivity of these enzymatically synthesized self‐doped polymers was relatively high without additional doping due to the self‐doping of the acid moieties. The conductivity did not decrease dramatically at pH 3 as is the usual case of unsubstituted HCl‐doped polyaniline and maintained good conductivity even at pH 6. The measured conductivity at pH 4～pH 6 is around 10^?4 S/cm to 10^?6 S/cm.     

Synthesis,Characterization and Electrorheological Properties of Polyindene/Kaolinite Composites

In this study, synthesis, characterization and electrorheological (ER) properties of polyindene (PIN) and polyindene/kaolinite composites were carried out by cationic radical polymerization using FeCl₃ as the oxidizing agent. The homopolymer and composites, containing different amounts of PIN were characterized by FTIR spectroscopy, thermo‐gravimetric (TGA) analyses, scanning electron microscopy (SEM) and dynamic light scattering (DLS) methods. The conductivity and dielectric properties of PIN and PIN/kaolinite composites were determined. Suspensions of PIN and PIN/kaolinite composites were prepared in silicone oil (SO), at a series of concentrations (c=5–25 m/m %). The effects of concentration, shear rate, electric field strength, frequency, temperature and promoter on ER activities of suspensions were investigated.     

Electrically insulated molecular wires

This paper is an up-to-date mini-review based on literature data and own results regarding synthesis and properties of conducting (pseudo)rotaxane supramolecular structures. Conjugated polymers, such as polyarylene, polyheteroarylene, polyaniline, polyarylenevinylene or polyaryleneimine, were used as axle, while the macrocyclic components were cyclodextrins, cucurbiturils, cyclophanes or crown ethers. Properties of the supramolecular structure such as solubility, thermal or chemical stability, conductivity, etc. can be drastically modified by the inclusion of hydrophobic conjugated polymers inside the macrocycle, without any chemical modification. For instance, the photophysical properties (i.e. quantum yield of fluorescence and electroluminescence) of the supramolecular structures were enhanced when compared with uninsulated conjugated polymers. The doping process is also affected, because the access of a dopant to the conjugated chain is limited only to the uncovered domains of the conjugated chain.     

淀粉功能化Fe_3O_4纳米簇球的制备与表征

以淀粉为表面活性剂,利用乙二醇溶剂热法一步制备了Fe3O4纳米簇球.采用X射线衍射仪、傅立叶变换红外光谱仪、扫描电镜等分析了产物的结构;采用热重分析仪测定了其热稳定性.结果表明:所得产物为直径约为230nm的簇球结构,构成簇球的纳米粒子直径约为10nm;引入淀粉成功地改善了产物的纳米结构和表面性能.合成的Fe3O4纳米簇球具有独特的结构和表面性能,在生物领域具有潜在的应用前景.     

Low Band Gap Donor‐Acceptor Conjugated Polymer Nanoparticles and their NIR‐mediated Thermal Ablation of Cancer Cells

Low band gap D‐A conjugated PNs consisting of 2‐ethylhexyl cyclopentadithiophene co‐polymerized with 2,1,3‐benzothiadiazole (for nano‐PCPDTBT) or 2,1,3‐benzoselenadiazole (for nano‐PCPDTBSe) have been developed. The PNs are stable in aqueous media and showed no significant toxicity up to 1 mg · mL^?1. Upon exposure to 808 nm light, the PNs generated temperatures above 50 °C. Photothermal ablation studies of the PNs with RKO and HCT116 colorectal cancer cells were performed. At concentrations above 100 µg · mL^?1 for nano‐PCPDTBSe, cell viability was less than 20%, while at concentrations above 62 µg · mL^?1 for nano‐PCPDTBT, cell viability was less than 10%. The results of this work demonstrate that low band gap D‐A conjugated polymers 1) can be formed into nanoparticles that are stable in aqueous media; 2) are non‐toxic until stimulated by IR light and 3) have a high photothermal efficiency.

     

Ritter Reactions between Alcohols and Acetonitrile Mediated by the Conducting Polymer Poly-(3,4-ethylenedioxy Thiophene) (PEDOT)

Herein, we report new reactivity of the conducting polymer, poly-(3,4-ethylenedioxy thiophene) (PEDOT), where PEDOT mediates a Ritter reaction between alcohols and acetonitrile. The yields were variable and in most cases competitive with results obtained using sulfuric acid. Attempts at a stoichiometric reaction between benzonitrile and diphenylmethanol are also reported herein. Finally, described here are preliminary mechanistic studies that suggest PEDOT is behaving as an alcohol-selective or specific Lewis acid.

Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for full experimental and spectral details.     

Polyaniline-coated coconut fibers: Structure,properties and their use as conductive additives in matrix of polyurethane derived from castor oil

Electrically conducting fibers based on coconut fibers (CF) and polyaniline (PANI) were prepared through in situ oxidative polymerization of aniline (ANI) in the presence of CF using iron (III) chloride hexahydrate (FeCl_3.6H₂O) or ammonium persulfate (APS) as an oxidant. The PANI-coated coconut fibers (CF-PANI) displayed various morphologies, electrical conductivities and percentages of PANI on the CF surface. For both systems, a PANI conductive layer was present on the CF surface, which was responsible for an electrical conductivity of around 1.5 × 10⁻¹ and 1.9 × 10⁻² S cm⁻¹ for composites prepared with FeCl₃.6H₂O and APS, respectively; values that are similar to that of pure PANI. In order to modify the structure and properties of polyurethane derived from castor oil (PU) both CF-PANI and pure PANI were used as conductive additives. The PU/CF-PANI composites exhibited higher electrical conductivity than pure PU and PU/PANI blends. Additionally, the PU/CF-PANI composites showed a variation in electrical resistivity according to the compressive stress applied, indicating that these materials could be applied for pressure-sensitive applications.     

Carbon‐Coated LiTi2(PO4)3: An Ideal Insertion Host for Lithium‐Ion and Sodium‐Ion Batteries

We report the extraordinary performance of carbon‐coated sodium super ion conductor (NASICON)‐type LiTi₂(PO₄)₃ as an ideal host matrix for reversible insertion of both Li and Na ions. The NASICON‐type compound was prepared by means of a Pechini‐type polymerizable complex method and was subsequently carbon coated. Several characterization techniques such as XRD, thermogravimetric analysis (TGA), field‐emission (FE) SEM, TEM, and Raman analysis were used to study the physicochemical properties. Both guest species underwent a two‐phase insertion mechanism during the charge/discharge process that was clearly evidenced from galvanostatic and cyclic voltammetric studies. Unlike that of Li (≈1.5 moles of Li), Na insertion exhibits better reversibility (≈1.59 moles of Na) while experiencing a slightly higher capacity fade (≈8 % higher than Li) and polarization (780 mV) than Li. However, excellent rate capability profiles were noted for Na insertion relative to its counterpart Li. Overall, the Na insertion properties were found to be superior relative to Li insertion, which makes carbon‐coated NASICON‐type LiTi₂(PO₄)₃ hosts attractive for the development of next‐generation batteries.